Category: 130-03-0

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.130-03-0,Benzo[b]thiophen-3(2H)-one,as a common compound, the synthetic route is as follows.

To AN-1 (6 g, 3.99 mmol)N2H4 hydrate (31.1 ml) was added to a solution in EtOH (60 mL).The mixture was heated to reflux and held for 45 min.The mixture was allowed to cool to rt and then concentrated.The residue was dissolved in diethylene glycol (20 mL) and EtOAc (EtOAc.The mixture was stirred at 120 C for 18 h.The mixture was cooled to rt, diluted with EtOAc and pH was adjusted to pH < 4 with 1 N HCl. The organic layer was washed with brine, dried over Na2EtOAcThe residue was purified by flash chromatography on SiO2 to yield AN-2. 130-03-0, As the paragraph descriping shows that 130-03-0 is playing an increasingly important role.

Reference£º
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; BAKONYI,JOHANNA; BRUNETTE,STEVEN RICHARD; COLLIN,DELPHINE; HUGHES,ROBERT OWEN; LI,XIANG; LIANG,SHUANG; SIBLEY,ROBERT; TURNER,MICHAEL ROBERT; WU,LIFEN; ZHANG,QIANG; (169 pag.)TW2018/38997; (2018); A;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.130-03-0,Benzo[b]thiophen-3(2H)-one,as a common compound, the synthetic route is as follows.

To a 5 mL flame-dried microwave flask was added benzo[b]thiophen-3(2H)-one (0.24 mmol, 0.12 equiv) and 5-aryl-2-formylpyrrole (0.2 mmol, 0.1 equiv). The flask was capped with analuminume-PTFE crimp cap, sealed, and evacuated and backfilled with nitrogen three times. To the flask was then added anhydrous toluene (2 mL, 0.1M in aldehyde) and piperidine (10 mL, 0.1 mmol,0.5 equiv). The flask was transferred to a pre-warmed oil bath set to 111 C and stirred for 2 h. After 2 h the flask was removed from theoil bath and cooled to room temperature and then to 0 C in a water-ice bath. To the flask was added hexanes (5 mL) and the flask was allowed to sit for an addition 10-30 min. The mixture was the filtered, and the precipitate was then triturated with hexanes to until the filtrate ran clear to provide the pure product as a red, blue,or purple solid depending on the substrate.

130-03-0, As the paragraph descriping shows that 130-03-0 is playing an increasingly important role.

Reference£º
Article; Zweig, Joshua E.; Ko, Tongil A.; Huang, Junrou; Newhouse, Timothy R.; Tetrahedron; vol. 75; 34; (2019);,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

130-03-0, Benzo[b]thiophen-3(2H)-one is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a 5 mL flame-dried microwave flask was added benzo[b]thiophen-3(2H)-one (0.24 mmol, 0.12 equiv) and 5-aryl-2-formylpyrrole (0.2 mmol, 0.1 equiv). The flask was capped with analuminume-PTFE crimp cap, sealed, and evacuated and backfilled with nitrogen three times. To the flask was then added anhydrous toluene (2 mL, 0.1M in aldehyde) and piperidine (10 mL, 0.1 mmol,0.5 equiv). The flask was transferred to a pre-warmed oil bath set to 111 C and stirred for 2 h. After 2 h the flask was removed from theoil bath and cooled to room temperature and then to 0 C in a water-ice bath. To the flask was added hexanes (5 mL) and the flask was allowed to sit for an addition 10-30 min. The mixture was the filtered, and the precipitate was then triturated with hexanes to until the filtrate ran clear to provide the pure product as a red, blue,or purple solid depending on the substrate.

130-03-0, As the paragraph descriping shows that 130-03-0 is playing an increasingly important role.

Reference£º
Article; Zweig, Joshua E.; Ko, Tongil A.; Huang, Junrou; Newhouse, Timothy R.; Tetrahedron; vol. 75; 34; (2019);,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

130-03-0, Benzo[b]thiophen-3(2H)-one is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a 5 mL flame-dried microwave flask was added benzo[b]thiophen-3(2H)-one (0.24 mmol, 0.12 equiv) and 5-aryl-2-formylpyrrole (0.2 mmol, 0.1 equiv). The flask was capped with analuminume-PTFE crimp cap, sealed, and evacuated and backfilled with nitrogen three times. To the flask was then added anhydrous toluene (2 mL, 0.1M in aldehyde) and piperidine (10 mL, 0.1 mmol,0.5 equiv). The flask was transferred to a pre-warmed oil bath set to 111 C and stirred for 2 h. After 2 h the flask was removed from theoil bath and cooled to room temperature and then to 0 C in a water-ice bath. To the flask was added hexanes (5 mL) and the flask was allowed to sit for an addition 10-30 min. The mixture was the filtered, and the precipitate was then triturated with hexanes to until the filtrate ran clear to provide the pure product as a red, blue,or purple solid depending on the substrate.

130-03-0, The synthetic route of 130-03-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zweig, Joshua E.; Ko, Tongil A.; Huang, Junrou; Newhouse, Timothy R.; Tetrahedron; vol. 75; 34; (2019);,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

130-03-0, Benzo[b]thiophen-3(2H)-one is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of AN-1 (6 g, 3.99 mmol) in EtOH (60 mL) is added N2H4 hydrate (31.1 ml). The mixture is heated to reflux for 45 min. The mixture is cooled to rt and then concentrated. The residue is dissolved in diethylene glycol (20 mL) and KOH (6.72 g, 120 mmol) is added. The mixture is stirred at 120 C for 18 h. The mixture is cooled to rt, diluted with EtOAc and the pH is adjusted with IN HC1 to pH < 4. The organic layers are washed with brine, dried over Na2S04 and concentrated. The residue is purified by Si02 flash chromatography to yield AN-2., 130-03-0

The synthetic route of 130-03-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; BAKONYI, Johanna; BRUNETTE, Steven Richard; COLLIN, Delphine; HUGHES, Robert Owen; LI, Xiang; LIANG, Shuang; SIBLEY, Robert; TURNER, Michael Robert; WU, Lifen; ZHANG, Qiang; WO2015/160654; (2015); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

130-03-0, Benzo[b]thiophen-3(2H)-one is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a mixture of 60% NaH (O.l7moI) and HCOOEt (O.l3mol) in toluene (200m1), ketone (O.lmoI) was added dropwise at O-5C. Then mixture was stirred for 16h at rt. Then reaction mixture was evaporated to dryness, residue was dissolved in water and organic residues was extracted with MTBE from aquaeous solution. Then water was acidified with AcOH to pH<7 and product was extracted with EtOAc: 130-03-0, As the paragraph descriping shows that 130-03-0 is playing an increasingly important role.

Reference£º
Patent; THE UNIVERSITY OF BRITISH COLUMBIA; TCHERKASSOV, Artem; RENNIE, Paul, S.; SINGH, Kriti; MUNUGANTI, Ravi Shashi Nayana; (107 pag.)WO2016/165007; (2016); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.130-03-0,Benzo[b]thiophen-3(2H)-one,as a common compound, the synthetic route is as follows.

To a 5 mL flame-dried microwave flask was added benzo[b]thiophen-3(2H)-one (0.24 mmol, 0.12 equiv) and 5-aryl-2-formylpyrrole (0.2 mmol, 0.1 equiv). The flask was capped with analuminume-PTFE crimp cap, sealed, and evacuated and backfilled with nitrogen three times. To the flask was then added anhydrous toluene (2 mL, 0.1M in aldehyde) and piperidine (10 mL, 0.1 mmol,0.5 equiv). The flask was transferred to a pre-warmed oil bath set to 111 C and stirred for 2 h. After 2 h the flask was removed from theoil bath and cooled to room temperature and then to 0 C in a water-ice bath. To the flask was added hexanes (5 mL) and the flask was allowed to sit for an addition 10-30 min. The mixture was the filtered, and the precipitate was then triturated with hexanes to until the filtrate ran clear to provide the pure product as a red, blue,or purple solid depending on the substrate., 130-03-0

As the paragraph descriping shows that 130-03-0 is playing an increasingly important role.

Reference£º
Article; Zweig, Joshua E.; Ko, Tongil A.; Huang, Junrou; Newhouse, Timothy R.; Tetrahedron; vol. 75; 34; (2019);,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

130-03-0, Benzo[b]thiophen-3(2H)-one is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a stirred mixture of ketone 1a or 1b (3 mmol) and diarylpropargylic alcohols 2a-e (3 ml) in acetonitrile (3 ml) the corresponding catalyst (Table 1) was added and the reaction mixture was refluxed under argon for 1 h. After cooling, the solvent was distilled off in vacuo. The residue was purified by recrystallization from the corresponding solvent or by chromatography on silica gel using the light petroleum/ethyl acetate (8:1) system as an eluent., 130-03-0

The synthetic route of 130-03-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Shirinian, Valerii Z.; Zavarzin, Igor V.; Leonova, Evgeniya S.; Markosyan, Ashot I.; Mendeleev Communications; vol. 25; 4; (2015); p. 262 – 263;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

130-03-0, Benzo[b]thiophen-3(2H)-one is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Under an inert atmosphere of argon, a solution of 9 mmol of Component 4 or Component 5 together with 5 mmol of thioindoxyl in 15 mL of methanol was vigorously stirred and to which small portions of Na2CO3 was added. After 1 h of stirring at 45 C, the dark red residue was filtered and successively and intensively washed with methanol and cold water. The resulting precipitate was filtered and purified by silica gel column chromatography (ethyl acetate:hexane 1:2).

130-03-0, 130-03-0 Benzo[b]thiophen-3(2H)-one 10986413, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Article; Hosseinnezhad, Mozhgan; Moradian, Siamak; Gharanjig, Kamaladin; Dyes and Pigments; vol. 123; (2015); p. 147 – 153;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

130-03-0, Benzo[b]thiophen-3(2H)-one is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Under an inert atmosphere of argon, a solution of 9 mmol of Component 4 or Component 5 together with 5 mmol of thioindoxyl in 15 mL of methanol was vigorously stirred and to which small portions of Na2CO3 was added. After 1 h of stirring at 45 C, the dark red residue was filtered and successively and intensively washed with methanol and cold water. The resulting precipitate was filtered and purified by silica gel column chromatography (ethyl acetate:hexane 1:2).

130-03-0, 130-03-0 Benzo[b]thiophen-3(2H)-one 10986413, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Article; Hosseinnezhad, Mozhgan; Moradian, Siamak; Gharanjig, Kamaladin; Dyes and Pigments; vol. 123; (2015); p. 147 – 153;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem