Category: benzothiophene

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.20532-33-6,5-Chlorobenzothiophene,as a common compound, the synthetic route is as follows.

Preparation 22 Preparation of 3-bromo-5-chlorobenzo[b]thiophene A solution of bromine (0.31 g, 1.95 mmol) in 1.0 ml glacial acetic acid was added to a stirred solution of 5-chlorobenzo[b]thiophene (0.300 g, 1.77 mmol)in glacial acetic acid (1.0 ml) under nitrogen atmosphere. The reaction was heated to 50 C. for 4 hours, the volatiles removed under reduced pressure, the residue diluted in methylene chloride, washed with aq. sodium bicarbonate and with brine and dried over sodium sulfate. Evaporation gave 0.335 g (76%) of a tan solid. mp 85-86 C., FDMS m/e=249 (M+2)., 20532-33-6

As the paragraph descriping shows that 20532-33-6 is playing an increasingly important role.

Reference£º
Patent; Eli Lilly Company; US5789402; (1998); A;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1127-35-1,Benzo[b]thiophene-3(2H)-one 1,1-Dioxide,as a common compound, the synthetic route is as follows.

A mixture of benzo[b]thiophen-3(2H)-one-1,1-dioxide (1b)(0.77 g, 4.2 mmol), paraformaldehyde (0.08 g, 2.5 mmol) and ammonium acetate(0.69 g, 9.0 mmol) in a mixture of toluene (30 mL) and acetic acid (5 mL) washeated at azeotropic reflux condition with the removal of water for 3 h. Aftercooling a white precipitate was ltered off and crystallised from acetic acidgiving 2b (0.65 g, 78%). The 1HNMR spectrum was in accordance with the one described above for the compound 2b., 1127-35-1

The synthetic route of 1127-35-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Cekavicus, Brigita; Vigante, Brigita; Rucins, Martins; Plotniece, Aiva; Pajuste, Karlis; Petrova, Marina; Belyakov, Sergey; Duburs, Gunars; Sobolev, Arkadij; Tetrahedron Letters; vol. 55; 33; (2014); p. 4601 – 4604;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4923-87-9,5-Bromobenzothiophene,as a common compound, the synthetic route is as follows.,4923-87-9

General procedure: To a solution in THF (4 mL) of DIPAB (863 mg, 7.5 mmol) and Mg (182 mg, 7.5 mmol) were added a PhMgBr 1M THF solution (375 muL, 375mumol) at room temperature. After 10 min, 30 mL of anhydrous THF were added followed by the arylbromide (5 mmol). The reaction mixture was cooled down to 0 C and quenched slowly with 7 mL of MeOH. After 1h, volatile were removed under reduced pressure and the resulting solid was dissolved in 1N HCl/MeOH (7/3). After 1h at room temperature, 100 mL of AcOEt were added, the organic phase was washed with 1N HCl (30 mL) and brine (3¡Á30 mL). Organic phases were concentrated under reduced pressure yielding a solid which was recrystallized from H2O.

4923-87-9 5-Bromobenzothiophene 2776578, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Article; Marciasini, Ludovic D.; Richard, Jimmy; Cacciuttolo, Bastien; Sartori, Guillaume; Birepinte, Melodie; Chabaud, Laurent; Pinet, Sandra; Pucheault, Mathieu; Tetrahedron; vol. 75; 2; (2019); p. 164 – 171;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

95-15-8, Thianaphthene is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

95-15-8, General procedure: In 0.5 M hexane solvent, 1.25 molar equivalents of Na-TMP was reacted with 0.4 mmol of benzo[b]thiophene (arene) at 25 C. for 30 minutes, 1.5 molar equivalents of heavy water (D2O: electrophilic reagent) was then added thereto and reacted therewith at 0 C. for 1 hour. The product was evaluated through analysis by 1H-NMR, and the yield of isolated deuterated benzo[b]thiophene in which a hydrogen atom located at 2-position of benzo[b]thiophene was substituted by heavy hydrogen was calculated in the same manner as in Experiment Number 1. The isolated yield was 99%.A reaction was performed using benzo[b]thiophene as an arene and carbon dioxide (CO2) as an electrophilic reagent in the same manner as in Experiment Number 2, the product was then evaluated, and the yield of isolated benzo[b]thiophene-2-carboxylic acid in which a carboxy group (-CO2H) was added at 2-position of benzo[b]thiophene was calculated. The isolated yield was 89%.

As the paragraph descriping shows that 95-15-8 is playing an increasingly important role.

Reference£º
Patent; KOBELCO ECO-SOLUTIONS CO.,LTD.; MURAKAMI, Yoshiaki; FUKUSHIMA, Miyuki; TAKAI, Kazuhiko; ASAKO, Sobi; (16 pag.)US2019/359571; (2019); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.360576-01-8,Methyl 6-bromobenzo[b]thiophene-2-carboxylate,as a common compound, the synthetic route is as follows.

To a solution of methyl 6-bromobenzothiophene-2-carboxylate (1.0 g, 3.7 mmol) in dioxane (30 mL) and H20 (6 mL) under nitrogen was added K2C03 (1.5 g, 11 mmol), Pd(dppf)Cl2 CH2C12 (301 mg, 0.37 mmol) and 2-(3,6-dihydro-2H-pyran-4-yl)-4,4,5,5-tetramethyl- 1,3,2-dioxaborolane (930 mg, 4.4 mmol). The mixture was stirred at 101 C for 48 hours. On completion, the reaction mixture was evaporated and purified by silica gel chromatography (petroleum ether: ethyl acetate = 16 : 1) to give compound B-165 (300 mg, 60% yield) as a white solid. i-NMR (CDC13, 400 MHz): delta 8.04 (s, 1H), 7.83 (d, J=8.4 Hz, 2H), 7.51-7.48 (m, 1H), 6.28 (d, J=1.6 Hz, 1H), 4.38-4.36 (m, 2H), 3.99-3.96 (m, 2H), 3.95 (s, 3H), 2.62-2.59 (m, 2H)., 360576-01-8

The synthetic route of 360576-01-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; FORUM PHARMACEUTICALS, INC.; ACHARYA, Raksha; BURNETT, Duane, A.; BURSAVICH, Matthew, Gregory; COOK, Andrew, Simon; HARRISON, Bryce, Alden; KOENIG, Gerhard; MCRINER, Andrew, J.; (400 pag.)WO2016/100184; (2016); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.95-15-8,Thianaphthene,as a common compound, the synthetic route is as follows.

95-15-8, Benzothiophene is n- butyl lithium and reaction of the intermediate obtained after the homo coupling reaction proceeds M63-1 (homocoupling reaction) under the action of anhydrous yeomhwadong After obtaining the lithium salt through a NBS bromination homo bromide M63-2 after getting the n- butyl lithium and reaction to obtain a pair bromide M63-4 through the NBS bromination and then generate a lithium salt, and the intermediate obtained through the homo-coupled anti-M63-3 under the action of anhydrous methyl N- yeomhwadong to give a compound of boric acid and 3-M63 via a Suzuki coupling reaction (white solid, yield 53%).

The synthetic route of 95-15-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Kunshan visionox Display Company Limited; Beijing Dingchai Technology Company Limited; Beijing visionox Technology Company Limited; Tsinghua University; Chiu, Yong; Pan, Hong Tao; Wang, Sing; Duan, Leanne; Run, Syueien; (77 pag.)KR2015/65184; (2015); A;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

5381-20-4, Thianaphthene-3-carboxaldehyde is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 1: Benzo[b]thiophen-3-ylmethyl-[2-(1-methyl-pyrrolidin-2-yl)-ethyl]-amine Experimental condition analogous to Example 5, from benzo[b]thiophen-3-carbaldehyde 0.16 g (1 mmol), 2-(1-methyl-pyrrolidin-2-yl)-ethylamine 0.14 g (1.1 mmol), and sodium triacethoxyborohydride 0.31 g (1.5 mmol), in 10 mL Dichloromethane. Purification using silica chromatography, elution with dichloromethane-methanol-ammonium hydroxide, 9-1-0.25, gave 140 mg of compound., 5381-20-4

5381-20-4 Thianaphthene-3-carboxaldehyde 227328, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Patent; ChemoCentryx, Inc.; US2006/74071; (2006); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

5381-20-4, Thianaphthene-3-carboxaldehyde is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5381-20-4, General procedure: A 100-mL, round-bottom flask equipped with a magnetic stirring bar was charged with TZD (1 mmole) and rhodanine(1 mmol) in ionic liquid ChCl/urea was added aldehyde (1mmol). The reaction mixture was stirred for adequate amount of time under solvent-free conditions (Table 2). The progress of the reaction was monitored by TLC(Chloroform: Methanol (4:1). After completion of the reaction, H2O (3 ml) was added and ILs separated. Then, the obtained crude compound was collected by filtration and then washed with water and methanol. Finally, products were recrystallized from ethanol to afford (1-10) a, b in the excellent yield.

5381-20-4 Thianaphthene-3-carboxaldehyde 227328, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Article; Akhavan, Malihe; Bekhradnia, Ahmadreza; Foroughifar, Naser; Pasdar, Hoda; Combinatorial chemistry and high throughput screening; vol. 22; 10; (2019); p. 716 – 727;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

3541-37-5, Benzo[b]thiophene-2-carboxaldehyde is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

[0055] Calixarene 7 (benzothiophene-pyrogallol calix[4]arene) was prepared by the following method. To a 250 mL round bottom flask, pyrogallol (1,2,3-trihydroxybenzene, 3.89 g, 30.8 mmol), benzo[b]thiophene-2-carboxaldehyde (5.00 g, 30 8 mmol), ethanol (100 mL), and HCl (concentrated, 10 mL) were added. A nitrogen inlet was equipped and the reaction was stirred at 80 C. for 16 hours. The reaction began as a clear solution but slowly formed a purple precipitate. After completion of the reaction, the resulting solution was filtered through a fritted funnel and the solid was washed with water (50 mL) and ethanol (50 mL). The product was dried in vacuo at 60 C. for 16 hours (yield: 6.30 g, 76%). LC-MS m/z=1081.2 g/mol

3541-37-5, The synthetic route of 3541-37-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ROHM AND HAAS ELECTRONIC MATERIALS LLC; Green, D. Patrick; Jain, Vipul; Bailey, Brad C.; US2013/157195; (2013); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

1423-61-6, 7-Bromobenzo[b]thiophene is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1423-61-6, A solution OF 7-BROMO-1-BENZOTHIOPHENE (19.9 g, 0.094 mol) in absolute ether (200 ml) was treated with a 1.6 M solution of n-butyllithium in hexane (0.14 mol, 88 ml) AT-78 C. The solution was stirred at-78 C for 10 minutes then treated with trimethyl borate (15 ml, 0.14 mol). The mixture was allowed to warm to-10 C then quenched with an excess of dilute hydrochloric acid. The organic layer was separated, dried, evaporated, and the residue was recrystallised from aqueous ethanol to yield the title compound (10 g, 60%).

The synthetic route of 1423-61-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Merck Sharp & Dohme Limited; WO2004/46133; (2004); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem