Category: benzothiophene

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.34761-09-6,Ethyl 3-aminobenzo[b]thiophene-2-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: To a solution of 3-aminobenzo[b]thiophene-2-carboxylate 7 (0.9 mmol) in glacial acetic acid (5ml) water solution of NaNO2( 1.8 mmol) was added dropwise. The mixture was left under stirring for 2h at rt. Then ammonium acetate (32.4 mmol) and an appropriate primary amine 9a-e (10 mmol) were added. The precipitate was filtered off, and the crude was recrystallized from ethanol., 34761-09-6

34761-09-6 Ethyl 3-aminobenzo[b]thiophene-2-carboxylate 731510, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Article; Lauria, Antonino; Alfio, Alessia; Bonsignore, Riccardo; Gentile, Carla; Martorana, Annamaria; Gennaro, Giuseppe; Barone, Giampaolo; Terenzi, Alessio; Almerico, Anna Maria; Bioorganic and Medicinal Chemistry Letters; vol. 24; 15; (2014); p. 3291 – 3297;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

5381-20-4, Thianaphthene-3-carboxaldehyde is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5381-20-4, Thianaphthene-3-carboxaldehyde (1.62 g, 10.0 mmol) was dissolved in anhydrous ethanol (50 ml_). Sulfamide (4.0 g, 42 mmol) was added and the mixture was heated to reflux for 16 hours. The mixture was cooled to room temperature. Sodium borohydride (0.416 g, 11.0 mmol) was added and the mixture was stirred at room temperature for three hours. The reaction was diluted with water (50 ml) and extracted with chloroform (3 x 75 ml_). The extracts were concentrated and chromatographed (5% methanol in DCM) and the solvent evaporate to yield the title compound as a white solid. 1H NMR (DMSO-(J6): delta 7.98 (1 H, dd, J = 6.5, 2.3 Hz), 7.92 (1 H, dd, J =6.6, 2.4 Hz), 7.62 (1 H, s), 7.36-7.45 (2H, m), 7.08 (1 H, t, J = 6.3 Hz), 6.72 (2H, S)1 4.31 (2H, d, J = 6.3 Hz).

5381-20-4 Thianaphthene-3-carboxaldehyde 227328, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2007/98486; (2007); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

17402-83-4, Benzo[b]thiophen-4-amine is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

[00348] To a stirred solution of benzo[b]thiophen-4-amine (1 g, 6.70 mmol) and pyridine (1.355 mL, 16.75 mmol) in (?(? (15 mL) was added dropwise methanesulfonyl chloride (0.574 mL, 7.37 mmol) at 0 ¡ãC under nitrogen atmosphere. The reaction mixture was then allowed to warm to room temperature while stirring overnight. The reaction mixture was washed with saturated sodium bicarbonate solution, water, brine and dried over sodium sulfate. Evaporation of the solvent furnished a crude residue, which was subjected to BIOTAGE? (100percent methylene chloride) to give the title compound as a white solid (1.2g, 79percent). LC/MS: Example 105A (at) 2.88 min (RT) (Condition H). MS (ES): m/z=226.0, [M+H]+. XH NMR (400 MHz, MeOD) delta ppm 7.77 (1 hr, d, J=7.81 Hz), 7.59 (2 hr, d, J=1.26 Hz), 7.25-7.42 (2 hr, m), 2.94 (3 hr, s).

17402-83-4, As the paragraph descriping shows that 17402-83-4 is playing an increasingly important role.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; BALOG, James Aaron; HUANG, Audris; VELAPARTHI, Upender; LIU, Peiying; WO2013/49263; (2013); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

5381-20-4, Thianaphthene-3-carboxaldehyde is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5381-20-4, This is based on Journal of Heterocyclic Chemistry, 18(5), 967-72, 1981. NaH (1.3 g, 28 mmol) was added to a mixture of 3-carbaldehydebenzo[b]thiophene (4.27 g, 25 mmol), diethyl benzylphosphonate (5.76 g, 25 mmol) in 50 mL of 1,2-dimethoxyethane at 0 C. under N2 and stirred for 15 minutes at 0 C. and 3 h at room temperature. The reaction mixture was then poured into ice water and filtrated. The solid from the filtration was recrystallized from ethanol to yield 4.5 g of desired product was obtained as a yellow solid. Synthesis of benzo[b]naphtha[2,1-d]thiophene.

The synthetic route of 5381-20-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Universal Display Corporation; US2011/266526; (2011); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

16587-47-6, 6-Methylbenzo[b]thiophene is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(i) 2,3-Dibromo-6-methylbenzo[b]thiophene Bromine (15.2 g.) was added dropwise over 5 minutes to a stirred solution of 6-methylbenzo[b]-thiophene (7.0 g.) in chloroform (70 ml.) at room temperature. The resulting solution was stirred at room temperature for 4 hours and then evaporated. The residue was crystallized from methanol to give 2,3-dibromo-6-methylbenzo[b]thiophene (12.4 g.), m.p. 67.5-68.5 C. Analysis %: Found: C, 35.09; H, 1.90. C9 H9 Br2 S Requires: C, 35.33; H, 1.98%., 16587-47-6

The synthetic route of 16587-47-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Pfizer Inc.; US4410539; (1983); A;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5381-20-4,Thianaphthene-3-carboxaldehyde,as a common compound, the synthetic route is as follows.

5381-20-4, 1-Benzothiophene-3-carbaldehyde (4c) (164 mg, 1.00 mmol) in 1.0 ml of dry THF was initially introduced into a dry 25 ml Schlenk flask filled with argon and with a magnetic stirrer core and septum, and Zn(TMP)2.2LiCl.2MgCl2 dissolved in THF (1.5 ml, 0.37 M, 0.55 equivalent) was added dropwise at room temperature. After 40 min the metallization was complete (GC analysis of reaction samples to which a solution of I2 in THF had been added indicated a conversion of more than 98%). A solution of 4-EtO2CPh-I (331 mg, 1.2 equivalents), Pd(dba)2 (5 mol %) (dba=dibenzylideneacetone) and tri-ortho-furylphosphine (Tfp) (10 mol %) in dry THF (2.5 ml) was then slowly added. After 5 h the reaction was ended by addition of saturated NH4Cl solution (10 ml). The aqueous phase was extracted with ethyl acetate (5¡Á10 ml), dried over MgSO4 and concentrated under reduced pressure. The crude product was purified by filter column chromatography (silica gel; CH2Cl2/pentane 1:1); 5c (208 mg, 67%) was obtained as a yellow, crystalline solid.

The synthetic route of 5381-20-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Ludwig Maximilians Universitat Munchen; US2010/160632; (2010); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

1423-61-6, 7-Bromobenzo[b]thiophene is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1423-61-6, Preparation 1; 2-Benzo[]thiophen-7-yl-4,4,5,5-tetramethyl-[l,3,2]dioxaborolane; Combine 7-bromo-benzo[7?]thiophene (426 mg, 2 mmol), bis(pinacolato)diboron (756 mg, 3 mmol), [l,r-bis(diphenylphosphino)ferrocene]dichloropalladium(II), complex with dichloromethane (1 : 1) (81 mg, 0.1 mmol), potassium acetate (294 mg, 3 mmol) in dimethyl sulfoxide (DMSO) (10 mL) in a flask. Bubble nitrogen through the mixture for 5 min. Seal the flask and heat in an oil bath at 100 0C for 4 hours. Dilute the mixture with chloroform/isopropanol (3/1). Wash the solution with saturated aqueous sodium chloride. Dry the solution over sodium sulfate. Concentrate the solution in vacuo to a dark residue. Purify by column chromatography (hexane to 20 % ethyl acetate in hexane) to afford the title compound (342 mg, 66 %) as a colorless solid. MS (ES) m/z 261 [M+ 1]+.

1423-61-6 7-Bromobenzo[b]thiophene 12045538, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Patent; ELI LILLY AND COMPANY; WO2008/76704; (2008); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

130-03-0, Benzo[b]thiophen-3(2H)-one is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a 5 mL flame-dried microwave flask was added benzo[b]thiophen-3(2H)-one (0.24 mmol, 0.12 equiv) and 5-aryl-2-formylpyrrole (0.2 mmol, 0.1 equiv). The flask was capped with analuminume-PTFE crimp cap, sealed, and evacuated and backfilled with nitrogen three times. To the flask was then added anhydrous toluene (2 mL, 0.1M in aldehyde) and piperidine (10 mL, 0.1 mmol,0.5 equiv). The flask was transferred to a pre-warmed oil bath set to 111 C and stirred for 2 h. After 2 h the flask was removed from theoil bath and cooled to room temperature and then to 0 C in a water-ice bath. To the flask was added hexanes (5 mL) and the flask was allowed to sit for an addition 10-30 min. The mixture was the filtered, and the precipitate was then triturated with hexanes to until the filtrate ran clear to provide the pure product as a red, blue,or purple solid depending on the substrate., 130-03-0

The synthetic route of 130-03-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zweig, Joshua E.; Ko, Tongil A.; Huang, Junrou; Newhouse, Timothy R.; Tetrahedron; vol. 75; 34; (2019);,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

3541-37-5, Benzo[b]thiophene-2-carboxaldehyde is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A mixture of appropriate piperazine base (i-vi, 1 mmol), aldehydes (1a-1d, 1 mmol) and around 1.1-1.3 mmol quantity of TMSCN was taken in 5-8 mL water. After stirring for a while, 10 mg Indium powder was added to the reaction mixture and the resulted reaction mass was allowed to stir at room temperature for 45 min-2.5 h. After the completion ofthe reaction as monitored by Thin Layer Chro-matography using toluene: acetone (8:2) or ethyl acetate: n-nexane (8:2) solvent system, after treatment with diethyl ether or ethyl acetate, solution was filtered and washed with water and brine followed by anhydrous sodium sulphate treatment to dry. The residue was purified by silica gel column chromatography (ethyl acetate: n-hexane) to afford compounds 2i-5vi.

3541-37-5, As the paragraph descriping shows that 3541-37-5 is playing an increasingly important role.

Reference£º
Article; Patel, Rahul V.; Patel, Jigar K.; Nile, Shivraj H.; Park, Se Won; Letters in drug design and discovery; vol. 10; 5; (2013); p. 462 – 470;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.6314-28-9,Benzo[b]thiophene-2-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: The heteroaryl acyl chlorides used in the synthesis of compounds 1b, 2b, 3b, 4b and 5b were commercially available. For compounds 6b, 7b, 8b, 9b and 10b, the chloride derivatives were prepared from the corresponding carboxylic acid (9.18 mmol) nd thionyl chloride (30 mL) with heating under reflux for 2 h. The thionyl chloride was removed in vacuo. The resulting acyl chloride was used without further purification., 6314-28-9

As the paragraph descriping shows that 6314-28-9 is playing an increasingly important role.

Reference£º
Article; Font, Maria; Lizarraga, Elena; Ibanez, Elena; Plano, Daniel; Sanmarti?, Carmen; Palop, Juan A.; European Journal of Medicinal Chemistry; vol. 66; (2013); p. 489 – 498;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem