Tag: M.W:100-200

6314-28-9, Benzo[b]thiophene-2-carboxylic acid is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Compound 9a (191 mg, 1 mmol) was refluxed in excess of thionylchloride (3 mL) overnight. Excess of thionyl chloride was evaporatedand the residue was dissolved in CH2Cl2, 3-bromopropylamine hydrobromide (328 mg, 1.5 mmol was addedfollowed by triethylamine (TEA; 0.42 mL, 3 mmol). The reactionmixture was stirred at room temperature. After the reaction wascompleted, the reaction mixture was diluted with CH2Cl2 andsequentially washed with water, 1 N HCl and saturated NaHCO3.The organic layer was dried over MgSO4, filtered and concentrated.The obtained product was purified by column chromatographywith n-hexane/ethyl acetate (EtOAc) = 4:1 to obtain 10a, (236 mg,76%) as white solid., 6314-28-9

The synthetic route of 6314-28-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Paudel, Suresh; Cao, Yongkai; Guo, Shuohan; An, Byeongkwan; Kim, Kyeong-Man; Cheon, Seung Hoon; Bioorganic and Medicinal Chemistry; vol. 23; 19; (2015); p. 6418 – 6426;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.6314-28-9,Benzo[b]thiophene-2-carboxylic acid,as a common compound, the synthetic route is as follows.

Benzo [b] thiophene-2-carboxylic acid (50 mg, 0.28 mmol) and dichloromethane (3 mL) was dissolved in thionyl chloride (SOCl2, 0.50 mL) and dimethylformamide (2 drops) after the addition, the mixture was stirred for 20 minutes at 50 .Thereafter, the reaction mixture was concentrated under reduced pressure, dichloromethane (3 mL) and then diluted to, quinolin-3-amine (50.0 mg, 0.347 mmol) and triethylamine (100 mg, 0.988 mmol) was added to 15 at room temperature and and it stirred for hours. When the thin film check chromatography (TLC), when a new spot is generated, to give the mixture was concentrated under reduced pressure, and purified by silica gel preparative thin layer chromatography (preparative TLC, ethyl acetate / n- hexane = 2/1), the reaction mixture is object of a white solid to give the compound (23.0 mg, 27%)., 6314-28-9

The synthetic route of 6314-28-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; KOREA RESEARCH INSTITUTE OF CHEMICAL TECHNOLOGY; JUNG, YOUNG SIK; KIM, PIL HO; HAN, SOO BONG; RAGHAVENDRA, ACHARY; KIM, MEE HYEIN; LEE, CHONG KYO; SHIN, JIN SOO; (131 pag.)KR2015/25531; (2015); A;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

5381-20-4,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5381-20-4,Thianaphthene-3-carboxaldehyde,as a common compound, the synthetic route is as follows.

Benzo[b]thiophene-3-carbaldehyde (1.0 equiv.) in toluene (5 mL) was slowly added with constant stirring to a 50 mL three-necked round bottomf lask containing substituted 2-aminobenzothiazole (1.0 equiv.) and anhydrous toluene (10 mL). The reaction mixture was refluxed for 10 h and then cooled down to room temperature. The solvent was removed under reduced pressure, and the crude product was purified by recrystallization using N,N-dimethylethanamine/acetone/petroleum etherto yield pure imines 1a-1f.

5381-20-4 Thianaphthene-3-carboxaldehyde 227328, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Article; Zhang, Peiwei; Tang, Chenghao; Chen, Zhiwei; Wang, Bo; Wang, Xiang; Jin, Linhong; Yang, Song; Hu, Deyu; Phosphorus, Sulfur and Silicon and the Related Elements; vol. 189; 4; (2014); p. 530 – 540;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

130-03-0, Benzo[b]thiophen-3(2H)-one is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a stirred mixture of ketone 1a or 1b (3 mmol) and diarylpropargylic alcohols 2a-e (3 ml) in acetonitrile (3 ml) the corresponding catalyst (Table 1) was added and the reaction mixture was refluxed under argon for 1 h. After cooling, the solvent was distilled off in vacuo. The residue was purified by recrystallization from the corresponding solvent or by chromatography on silica gel using the light petroleum/ethyl acetate (8:1) system as an eluent., 130-03-0

The synthetic route of 130-03-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Shirinian, Valerii Z.; Zavarzin, Igor V.; Leonova, Evgeniya S.; Markosyan, Ashot I.; Mendeleev Communications; vol. 25; 4; (2015); p. 262 – 263;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22913-24-2,Methyl benzo[b]thiophene-2-carboxylate,as a common compound, the synthetic route is as follows.

Methyl 4-chloromethyl-benzothiophene-2-carboxylate Refer to Chart A (conversion of XIII to XIV). A three-neck round-bottomed flask equipped with a magnetic stirring bar, a condenser, and a gas bubbler, is charged with a solution of methyl benzothiophene-2-carboxylate (XIII) (32.6 g, 0.17 mol) dissolved in 85 ml of chloroform. Paraformaldehyde (6.7 g, 0.22 mol) and zinc chloride (6.1 g, 0.045 mol) (dried at 100 C. under vacuum for 2 days) are addefd. The resulting mixture is heated to 50 C. and anhydrous hydrogen chloride gas is bubbled slowly through the magnetically stirred mixture. After 4-5 hr, the mixture is cooled, diluted with chloroform and washed with water, saturated aqueous sodium bicarbonate, and brine. Drying (MgSo4), filtration, and concentration afford the crude product which is purified by chromatography to give the titled product., 22913-24-2

As the paragraph descriping shows that 22913-24-2 is playing an increasingly important role.

Reference£º
Patent; The Upjohn Company; US4447620; (1984); A;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

3541-37-5, Benzo[b]thiophene-2-carboxaldehyde is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of benzo[b]thiophene-2-carboxaldehyde (2?mmol) in ethanol (5?mL), 4-ethylthiosemicarbazide (2?mmol) and acetic acid (0.5?mL) were added. The mixture was stirred for 10?min?at 80?C. After cooling to room temperature, the white precipitate was obtained. The white solid was collected by filtration and the crude product was further purified by recrystallization from ethanol. (E)-2-(benzo[b]thiophen-2-ylmethylene)-N-ethylhydrazine-1-carbothioamide was obtained (BS2C-ETSC). The other two compounds, (E)-2-(benzo[b]thiophen-2-ylmethylene)hydrazine-1-carbothioamide (BS2C-TSC) and (E)-2-(benzo[b]thiophen-2-ylmethylene)-N-methylhydrazine-1-carbothioamide (BS2C-MTSC) were prepared with the same procedure as BS2C-ETSC.

3541-37-5, The synthetic route of 3541-37-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Qiao, Yuqian; Che, Yuanyuan; Yu, Yuming; Tang, Yakun; Liu, Lang; Zhao, Xianmei; Zhao, Jianzhang; Dyes and Pigments; vol. 156; (2018); p. 326 – 331;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

20532-33-6, 5-Chlorobenzothiophene is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To 5-chloro-benzo[b]thiophene (702 mg, 4.16 mmol) in 3.5 ml of anhydrous THF at -78 C. under argon was added n-BuLi (2.6 ml, 1.6 M in hexanes) and the resulting mixture was stirred at that temperature for 1 h, then 4-(benzyloxy)-5-bromo-2-methylbenzaldehyde (1.27 g, 4.16 mmol) in 2.5 ml of THF was added dropwise over 5 mins. The reaction mixture was stirred at -78 C. for 1 h, then was left in -30 C. freezer overnight. It was then quenched with aq. NH4Cl solution, extracted with EtOAc three times. The combined organic layer was washed with brine, dried with Na2SO4 and the solvent was evaporated. The residue was purified by flash column chromatography on silica gel (80 g column, EtOAc/heptane: 0>>>10%) to yield 1.77 g (89.7%) of 20-A as a white solid. 1H NMR (CDCl3) delta 7.75 (s, 1H), 7.65 (d, J=8.59 Hz, 1H), 7.61 (d, J=2.02 Hz, 1H), 7.45-7.51 (2H), 7.36-7.43 (2H), 7.32 (m, 1H), 7.24 (dd, J=8.08, 2.02 Hz, 1H), 6.95 (s, 1H), 6.73 (s, 1H), 6.11 (d, J=3.54 Hz, 1H), 5.13 (s, 2H), 2.60 (d, J=4.04 Hz, 1H), 2.23 (s, 3H). MS (ES) 495.0 (M+Na+).

20532-33-6, The synthetic route of 20532-33-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Janssen Pharmaceutica NV; Gaul, Micheal; Kuo, Gee-Hong; Xu, Guozhang; Zhao, Bao-Ping; US2014/256657; (2014); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

20532-33-6, 5-Chlorobenzothiophene is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 5-chlorobenzo[b]thiophene (30 mmol) in AcOH (10 mL) and DCM (50 mL) at room temperature was added NBS (30 mmol) in one portion. After stirring overnight, the reaction mixture was treated with Na2S03 and water, followed by extraction with EtOAc. The combined organic layers were washed with brine and dried over anhydrous Na2S04. After filtration and concentration, the crude product was purified by column chromatography to give the title compound

20532-33-6, As the paragraph descriping shows that 20532-33-6 is playing an increasingly important role.

Reference£º
Patent; SUNOVION PHARMACEUTICALS INC.; CAMPBELL, John, Emmerson; CAMPBELL, Una; HANANIA, Taleen, G.; SHAO, Liming; WO2013/119895; (2013); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5381-20-4,Thianaphthene-3-carboxaldehyde,as a common compound, the synthetic route is as follows.,5381-20-4

EXAMPLE 1 N-(benzo[b]thien-3-ylmethyl)-sulfamide (Compound #1) Thianaphthene-3-carboxaldehyde (1.62 g, 10.0 mmol) was dissolved in anhydrous ethanol (50 mL). Sulfamide (4.0 g, 42 mmol) was added and the mixture was heated to reflux for 16 hours. The mixture was cooled to room temperature. Sodium borohydride (0.416 g, 11.0 mmol) was added and the mixture was stirred at room temperature for three hours. The reaction was diluted with water (50 mL) and extracted with chloroform (3*75 mL). The extracts were concentrated and chromatographed (5% methanol in DCM) to yield the title compound as a white solid. 1H NMR (DMSO-d6): delta 7.98 (1H, dd, J=6.5, 2.3 Hz), 7.92 (1H, dd, J=6.6, 2.4 Hz), 7.62 (1H, s), 7.36-7.45 (2H, m), 7.08 (1H, t, J=6.3 Hz), 6.72 (2H, s), 4.31 (2H, d, J=6.3 Hz).

As the paragraph descriping shows that 5381-20-4 is playing an increasingly important role.

Reference£º
Patent; Parker, Michael H.; Reitz, Allen B.; Maryanoff, Bruce E.; US2006/47001; (2006); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1127-35-1,Benzo[b]thiophene-3(2H)-one 1,1-Dioxide,as a common compound, the synthetic route is as follows.

Under nitrogen atmosphere, 100mL round bottom flask was charged sulfone group indanone (728mg, 4.0mmol), malononitrile (1.32g, 20.0mol) and absolute ethanol (11mL).Was then added anhydrous sodium acetate (656mg, 8.0mol), stirred at rt overnight, the reaction was completed hydrochloric acid to adjust the pH 1-2, then filtered, washed with deionized water 3-5 times, and dried in vacuo to give a white solid (847mg, yield 92%)., 1127-35-1

The synthetic route of 1127-35-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Chinese Academy Of Sciences Ningbo Materials Technology And Engineering Institute; Fang Junfeng; Zhang Wenjun; Song Changjian; (26 pag.)CN109232604; (2019); A;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem